Ordering Information
Specification Table
| Series |
TCN4S |
TCN4M |
TCN4H |
TCN4L |
| Power |
AC power |
100-240VAC 50/60Hz |
| supply |
AC/DC power |
24VAC 50/60Hz, 24-48VDC |
| Allowable voltage range |
90 to 110% of rated voltage |
| Power consumption |
Max. 5VA(100-240VAC 50/60Hz, 24VAC 50/60Hz) |
| Max. 3W(24-48VDC) |
| Display method |
7 Segment (PV: red, SV: green), Other display(green, red) LED |
| Character |
PV(W×H) |
7.0x15.0mm |
9.5x20.0mm |
7.0x14.6mm |
11.0x22.0mm |
| size |
SV(WxH) |
5.0x9.5mm |
7.5x15.0mm |
6.0x12.0mm |
7.0x14.0mm |
| Input |
RTD |
DPt100Ω, Cu50Ω(Allowable line resistance max. 5Ω per a wire) |
| type |
Thermocouple |
K(CA), J(IC), L(IC), T(CC), R(PR), S(PR) |
| Display |
RTD |
● At room temperature (23°C ±5°C): (PV ±0.5% or ±1°C, select the higher one) ±1digit
● Out of room temperature range: (PV ±0.5% or ±2°C, select the higher one) ±1digit |
Display
accuracy※1 |
Thermocouple |
| Control output |
Relay |
250VAC 3A 1 a |
| SSR |
12VDC ±2V 20mA Max. |
| Alarm output |
AL1, AL2 Relay output : 250VAC 1A 1a |
| Control method |
ON/OFF and P, PI, PD, PID control |
| Hysteresis |
1 to 100°C/°F (0.1 to 50.0°C/°F) variable |
| Proportional band (P) |
0.1 to 999.9°C/°F |
| Integral time (I) |
0 to 9999 sec. |
| Derivative time (D) |
0 to 9999 sec. |
| Control period (T) |
0.5 to 120.0 sec. |
| Manual reset |
0.0 to 100.0% |
| Sampling period |
100ms |
| Dielectric strength |
AC Power |
2,000VAC 50/60Hz 1min.(between input terminal and power terminal) |
| AC/DC power |
1,000VAC 50/60Hz 1min.(between input terminal and power terminal) |
Relay
life cycle |
Mechanical |
OUT: Over 5,000,000 times, AL1/2: Over 5,000,000 times |
| Electrical |
OUT: Over 200,000 times(250VAC 3A resistive load) AL1/2: Over 300,000 times(250VAC 1A resistive load) |
| Vibration |
0.75mm amplitude at frequency of 5 to 55Hz in each of X, Y, Z directions for 2 hours |
| Insulation resistance |
Min. 100MΩ(at 500VDC megger) |
| Noise resistance |
±2kV R-phase, S-phase the square wave noise (pulse width: 1us) by the noise simulator |
| Memory retention |
Approx. 10 years (when using non-volatile semiconductor memory type) |
| Environment |
Ambient temperature |
-10 to 50°C, storage: -20 to 60°C |
| Ambient humidity |
35 to 85%RH, storage: 35 to 85%RH |
| Insulation type |
Double insulation or reinforced insulation (mark: 回, Dielectric strength between the measuring input part and the power part: AC power 2kV, AC/DC Power 1kV) |
| Approval |
CE, UL |
| Noise resistance |
Approx. 147g(Approx. 100g) |
Approx. 203g (Approx. 133g) |
Approx. 194g (Approx. 124g) |
Approx. 275g (Approx. 179g) |
※1 : ◎ At room temperature (23°C ±5°C)
● Thermocouple C R, S type, below 200℃: (PV ±0.5% or ±3°C, select the higher one) ±1digit
● Thermocouple R, S type, over 200℃: (PV ±0.5% or ±2°C, select the higher one) ±1digit
● Thermocouple L(IC) type, RTD Cu50Ω: (PV ±0.5% or ±2°C, select the higher one) ±1digit
◎ Out of room temperature range
● Thermocouple R, S type, below 200°C: (PV ±1.0% or ±6°C, select the higher one) ±1digit
● Thermocouple R, S type, over 200°C: (PV ±0.5% or ±5°C, select the higher one ±1digit
● RTD Cu50Ω: (PV ±0.5% or ±3°C, select the higher one) ±1digit
※2: The weight is with packaging and the weight in parentheses is only unit weight.
※Environment resistance is rated at no freezing or condensation.
Dimensions
User's Guide
Caution for your safety
 |
